S.L. 545.20 Art. 16Material alterations.

(1) The authorised provider shall not undertake or permit to be undertaken any material alterations to the authorised facility, unless the written consent of the Regulator has been obtained.

(2) The approved consent to the material alterations by the Regulator under these regulations shall not exempt the authorized provider from the requirement of obtaining any other written approval or permit required under any other law.

(3) No person, other than a competent person, shall supervise any material alteration carried out on an authorised facility.

(4) In supervising the material alterations, the competent person shall follow any guidelines that the Regulator may from time to time issue.

(5) Once the material alterations have been carried out, the competent person commissioned by the authorised person to supervise the material alterations and the competent LPG installer commissioned by the authorised person to perform such alterations must submit in writing a certification that all safety requirements imposed on the authorised facility have been complied with.

(6) The Regulator may, subsequent to the material alterations referred to in sub-regulation (5) send an inspector to perform an assessment inspection of the authorised facility.

(7) No person other than a competent LPG installer, shall construct or carry out any material alteration on an authorised facility or a facility required to be so authorised: Provided that such competent LPG installer shall be supervised by a competent person in the construction of and the carrying out of any material alteration on an authorised facility or a facility required to be so authorised.