S.L. 427.75 Art. 135 to 8 in with the test regulation 4(6) in the fiche, are set out in Mail order Internet or on contain the 1. 2. of 3. 4. 5. of 6. 7. T1 8. 9. 10. 11. A then the 1.

Suppliers may include in addition the information in points respect of other test conditions determined in accordance procedures of the harmonised standards referred to in and (7). If a copy of the label, either in colour or black and white is included then only the further information needs to be added. NB: The equivalent terms in other languages to those given above Schedule V. SCHEDULE III Based on Annex III of Directive 2002/31/EC

MAIL ORDER AND OTHER DISTANCE SELLING catalogues, communications, written offers, advertisements on the other electronic media referred to in regulation 4(4) hereof shall following information, given in the order specified:

Supplier’s trade mark. Supplier’s model identifier. For "split and multi-split units", the model identifier of the indoor and the outdoor elements of the combination to which the figures quoted below apply. The energy efficiency class of the model, determined in accordance with Schedule IV. Expressed as "Energy efficiency class on a scale of A (more efficient) to G (less efficient)". Where this information is provided in a table this may be expressed by other means provided it is clear that the scale is from A (more efficient) to G (less efficient). Where the information is provided in a table, and where some of the appliances listed in the table have been granted a "European Union eco-label" under Regulation (EC) No 1980/2000, this information may be included here. In this case the row heading shall state "European Union eco-label", and the entry shall consist of a copy of the eco-label mark. This provision is without prejudice to any requirements under the Community eco-label scheme. The indicative annual consumption of energy based on an average of 500 hours per year, determined in accordance with the test procedures the harmonised standards referred to in regulation 4(6) and (7) (conditions T1 "moderate") as defined in Schedule I, note VI. The cooling output defined as the cooling capacity in kW of the appliance in cooling mode at full load, determined in accordance with the test procedures of the harmonised standards referred to in regulation 4(6) and (7) (conditions T1 "moderate") as defined in Schedule I, note VI. The EER (energy efficiency ratio) of the appliance in cooling mode at full load, determined in accordance with the test procedures of the harmonised standards referred to in regulation 4(6) and (7) (conditions "moderate"). The type of appliance: cooling only, cooling/heating. The cooling mode: air cooled, water cooled. Only for appliances with heating capability the heat output defined as the heating capacity in kW of the appliance in heating mode at full load, determined in accordance with the test procedures of the harmonised standards referred to in regulation 4(6) and (7) (conditions T1 + 7C) as defined in Schedule I, note VI. Only for appliances with heating capability the heating mode energy efficiency class in accordance with Schedule IV, expressed on a scale of (higher) to G (lower), determined in accordance with the test procedures of the harmonised standards referred to in regulation 4(6) and (7) (conditions T1 + 7C) as defined in Schedule I, note VI. If the appliance heating capability is provided by a resistive element COP (coefficient of performance) shall have the value of