S.L. 427.37 Art. 24Market surveillance.

(1) The Technical Regulations Division shall take appropriate measures to ensure that lifts and safety components of lifts may only be placed on the market if they satisfy the essential health and safety requirements set out in Schedule I.

(2) Article 15(3) and Article 17 to 22 of Regulation (EC) No 765/2008 shall apply to lifts and safety components for lifts.

(3) Where the Technical Regulations Division have sufficient reasons to believe that a lifts or a safety component for lifts covered by these regulations presents a risk to the health or safety of persons or, where appropriate to the safety of property, they shall carry out an evaluation in relation to the lift or safety component for lifts concerned covering all relevant requirements laid down in these regulations. The relevant economic operators shall cooperate as necessary with the market surveillance authorities for that purpose.

(4) Where, in the course of the evaluation referred to in sub-regulation (3), the Technical Regulations Division find that a lift does not comply with the requirements laid down in these regulations, they shall without delay require the installer to take all appropriate corrective actions to bring the lift or safety component for lifts into compliance with those requirements, to withdraw the safety component for lifts from the market, or to recall it within a reasonable period, commensurate with the nature of the risk, as they may prescribe. They shall also inform the notified body accordingly.

(5) Article 21 of Regulation (EC) No 765/2008 shall apply to the measures referred to in sub-regulation (4).

(6) Where the Technical Regulations Division consider that non-compliance is not restricted to the Maltese territory, it shall inform the European Commission and the other Member States of the results of the evaluation and of the actions which they have required the economic operator to take.

(7) The economic operator shall ensure that all appropriate corrective action is taken in respect of all the lifts or safety components for lifts concerned that it has made available on the market throughout the European Union.

(8) Where the installer does not take adequate corrective action within the period referred to in sub-regulation (4), the Technical Regulations Division shall take all appropriate provisional measures to prohibit or restrict the placing on the Maltese market or the use of the lifts concerned, or recall it.

(9) Where the relevant economic operator does not take adequate corrective action within the period referred to in sub-regulation (4), the Technical Regulations Division shall take all appropriate provisional measures to prohibit or restrict the safety component for lifts being made available on their national market, to withdraw the safety component for lifts from that market or to recall it.

(10) The Technical Regulations Division shall inform the European Commission and the other Member States, without delay, of those measures.

(11) The information referred to in the sub-regulation (10) shall include all available details, in particular the data necessary for the identification of the non-compliant lift or safety component for lifts, the origin, the nature of the non-compliance alleged and the risk involved, the nature and duration of the national measures taken and the arguments put forward by the relevant economic operator. In particular, the Technical Regulations Division shall indicate whether the non-compliance is due to either of the following:

(a) failure of the lift or the safety component for lifts to meet the essential health or safety requirement of these regulations; or

(b) shortcomings in the harmonised standards referred to in regulation 15 conferring a presumption of conformity.

(12) When the procedure under these regulations is initiated by another Member State, the Technical Regulations Division, shall without delay inform the European Commission and the other Member States of any measures adopted and of any additional information at their disposal relating to the non-compliance of the lift or the safety component for lifts concerned, and, in the event of disagreement with the adopted national measure, of their objections.

(13) Where, within three months of receipt of the information referred to in sub-regulation (10), no objection has been raised by either a Member State or the European Commission in respect of a provisional measure taken by a Member State, that measure shall be deemed justified.

(14) In such cases, the Technical Regulations Division shall ensure that appropriate restrictive measures, such as withdrawal of the lift or the safety component for lifts from the Maltese market, are taken in respect of the lift or the safety component for lifts concerned without delay.

(15) Where on completion of the procedure set out in sub-regulations (7) and (8), objections are raised against the measures taken by Technical Regulations Division; the European Commission shall conduct an evaluation including appropriate consultations with these entities and the relevant economic operator or operators.

(16) If, on the basis of this evaluation, the national measure is considered justified, the Technical Regulations Division shall take the measures necessary to ensure that the placing on the market or use of the non-compliant lift or the safety component for lifts is withdrawn from the Maltese market and shall inform the European Commission accordingly. If, on the basis of this evaluation, the national measure is considered unjustified, the national measure shall be withdrawn.

(17) Where, having carried out an evaluation under sub-regulation (3), the Technical Regulations Division, finds that although a lift or the safety component for lifts is in compliance with these regulations, it presents a risk to the health or safety of persons or to other aspects of public interest protection, it shall require the relevant economic operator to take all appropriate measures to ensure that the lift or the safety component for lifts concerned, when placed on the Maltese market, no longer presents that risk, to withdraw the lift or the safety component for lifts from the market or to recall it within a reasonable period, commensurate with the nature of the risk, as it may prescribe.

(18) The economic operator shall ensure that corrective action is taken in respect of all the lifts or safety components for lifts concerned that he has made available on the market throughout the European Union.

(19) The Technical Regulations Division, upon consultation with the Commissioner of Police, shall immediately inform the European Commission and the other Member States. That information shall include all available details, in particular the data necessary for the identification of the lift or the safety component for lifts concerned, the origin and the supply chain of the lifts or safety component of lifts, the nature of the risk involved and the nature and duration of the national measures taken.

(20) Without prejudice to sub-regulations (3) to (14), where the Technical Regulations Division and, or the Commissioner of Police make one of the following findings, it shall require the relevant economic operator to put an end to the non-compliance concerned:

(a) the CE marking has been affixed in violation of Article 30 of Regulation (EC) No 765/2008 or of regulation 19;

(b) the CE marking has not been affixed;

(c) the identification number of the notified body has been affixed in violation of regulation 19 or has not been affixed where required by regulation 19;

(d) the EU declaration of conformity has not been drawn up;

(e) the EU declaration of conformity has not been drawn up correctly;

(f) technical documentation is either not available or not complete;

(g) the name, registered trade name or registered trade mark or the address of the installer, manufacturer or importer has not been indicated in compliance with regulation 8(7), regulation 9(8) or regulation 11(4);

(h) the information allowing identification of the lift or the safety component for lifts has not been indicated in compliance with regulation 8(6) or regulation 8(5);

(i) the lift or the safety component for lifts is not accompanied by the documents referred to in regulation 8(8) or regulation 9(9) or those documents are not in compliance with the applicable requirements.

(21) Where the non-compliance referred to in sub-regulation

(20) persists, the Technical Regulations Division shall take all appropriate measures to restrict or prohibit the use of the lift or to recall it, or to restrict or prohibit the making available on the Maltese market of the safety component for lifts or ensure that it is recalled or withdrawn from the Maltese market.

(22) The powers of the Commissioner of Police under this regulation may be exercised by any officer or other entity as he may direct.