S.L. 427.30 Art. 18Penalties. Cap. 427. LIST OF UN Number: 1051 1052 1745 1746 1790 2495 (1) The to in 2003 complies and of these in this (2) The EN ISO/IEC information to identify the also details appropriate, repairs which (3) The assess whether of safety as Directive information further (4) If the transportable for

The penalties applicable for the infringement of any of the provisions above shall be those provided for in Part IV of the Product Safety Act. Schedule I

DANGEROUS GOODS OTHER THAN THOSE IN CLASS 2 Class: Dangerous substance: 6.1 HYDROGEN CYANIDE, STABILISED Containing less than 3% water 8 HYDROGEN FLUORIDE, ANHYDROUS 5.1 BROMINE PENTAFLUORIDE Exluding carriage in tanks 5.1 BROMINE TRIFLUORIDE Excluding carriage in tanks 8 HYDROFLUORIC ACID With more than 85% hydrogen fluoride 5.1 IODINE PENTAFLUORIDE Excluding carriage in tanks

Schedule II PROCEDURE FOR REASSESSMENT OF CONFORMITY method for ensuring that the transportable pressure equipment referred regulation 2(1)(c) manufactured and put into service before the 1st January with the relevant provisions of the Annexes to Directive 2008/68/EC regulations as applicable at the time of reassessment shall be as set out Schedule. owner or operator must make available to a notified body conforming to 17020:2004 type A, notified for reassessment of conformity, the regarding the transportable pressure equipment which enables that body equipment precisely (origin, design rules, and for acetylene cylinders of the porous material). The information shall include, where any prescribed restrictions on use, and any notes on possible damage or have been carried out.

type A notified body, notified for reassessment of conformity, shall the transportable pressure equipment affords at least the same degree the transportable pressure equipment referred to in the Annexes to 2008/68/EC. The assessment shall be carried out on the basis of the produced in accordance with paragraph 2 and, where appropriate, of inspections. results of the assessment in paragraph 3 are satisfactory, the pressure equipment shall be subject to the periodic inspection provided Annexes to Directive 2008/68/EC. If the requirements of that periodic met the Pi marking shall be applied by or under the surveillance of the responsible for the periodic inspection in accordance with regulations The Pi marking shall be followed by the identification number of the responsible for the periodic inspection. The notified body responsible periodic inspection shall issue a certificate of reassessment in accordance 6. pressure receptacles were manufactured in series, the manufacturer the reassessment of conformity of individual pressure receptacles, including their valves and other accessories used for transport. Such to be carried out by a notified body notified for periodic inspection transportable pressure receptacles provided that conformity of the assessed in accordance with paragraph 3 by a type A notified body, the reassessment of conformity, and a certificate of type reassessment marking shall be followed by the identification number of the responsible for the periodic inspection.

(6) In all cases the notified body responsible for the periodic inspection issue the certificate of reassessment containing as a minimum:

(a) the identification of the notified body issuing the certificate, different, the identification number of the type A responsible for the reassessment of conformity in accordance paragraph 3;

(b) the name and address of owner or operator specified in paragraph

(c) in the case of the application of the procedure in paragraph identifying the certificate of type reassessment;

(d) the data for identification of the transportable pressure which Pi marking has been applied including at least the or numbers; and

(e) the date of issue.

(7) A certificate of type reassessment shall be issued. Where the paragraph 5 is applied the type A body, responsible for the reassessment conformity, shall issue the certificate of type reassessment containing

(a) the identification of the notified body issuing the certificate;

(b) the name and address of the manufacturer and the holder type approval for the transportable pressure equipment being when the holder is not the manufacturer;

(c) the data identifying the transportable pressure equipment the series;

(d) the date of issue; and

(e) the words: ‘this certificate does not authorise manufacture transportable pressure equipment or parts thereof’.

(8) By affixing or having affixed the Pi marking, the owner or operator that he takes responsibility for the conformity of the transportable equipment with all applicable requirements set out in the Annexes to Directive 68/EC and in these regulations as applicable at the time of reassessment.